Ronseal One Coat Shed & Fence Protector - 5L - Medium Oak

This product is designed to provide lasting color and protection for up to two years, depending on weather exposure and surface conditions.

This product is specifically formulated for sheds and fences. It is not recommended for decking, garden furniture, or other smooth, planed timber surfaces.

The Ronseal One Coat Shed & Fence Protector is quick-drying and becomes showerproof in just one hour after application under normal drying conditions.

No, this product is designed to provide full color and protection in a single coat, making it highly efficient.

Ensure the wood surface is clean, dry, and free from any dirt, algae, or loose material. A stiff brush or light sanding may be required for optimal adhesion.

Yes, the formula can be mixed with water, which is particularly useful for spray application or to aid with clean-up.

The product is showerproof in one hour. If heavy rain occurs before this time, some wash-off may occur, and you might need to reapply to affected areas once dry.

Clean all application tools immediately after use with warm, soapy water. As it's a water-based product, clean-up is straightforward.

Ensure the wood surface is clean and dry before application. Stir the product thoroughly before and during use. Apply an even coat, avoiding over-application in one area.

Check the ambient temperature and humidity; drying times can be extended in cold or damp conditions. Ensure the coat applied is not excessively thick. Allow more time if necessary.

Verify that the wood surface was properly prepared and clean. Ensure a sufficient and even coat was applied. The product provides protection for up to two years, but reapplication may be needed if signs of wear appear sooner due to extreme weather or substrate condition.

Ensure the product is properly diluted with water as per instructions for spray application. Check the nozzle of your spray gun for blockages and ensure it's set to an appropriate pattern.