This product is a powerful mixture of non-chlorinated solvents, designed to remove most types of p...This product is a powerful mixture of non-chlorinated solvents, designed to remove most types of paints, surface coatings and worn gaskets. The viscous gel formula clings to vertical surfaces, helping to prevent run-off. This paint stripper is free from dichloromethane and is non-chlorinated. It removes or softens most types of paint, varnish and lacquer, and also helps to remove worn gaskets and rubber residues. Additionally, it breaks down charred oil and other carbon deposits. The gel formula clings to vertical surfaces, preventing run-off. It is suitable for use on most types of paint including 2-Pack, Acrylic, Cellulose, Vinyl, Alkyd and Polyurethane. It can also be used on rocker box covers and manifolds when removing worn gaskets, and on metallic engine components when removing carbon deposits. It should not be used on materials or substrates sensitive to powerful polar solvents such as plastics or rubber components (unless it requires removal). To use, shake the can well, spray liberally onto the surface, leave for 15 minutes, and then remove with a scraper or similar instrument. Do not allow the product to dry before removal.
B&Q - Adhesion Promotor Clear Adhesive Primer 400MlFree delivery in 1–3 days£20.69Visit shop →
Product Information
Full details
This guide is for anyone using Hycote Paint Stripper Spray (400ML) to remove paint, coatings, and residues. The primary benefit is its ability to effectively remove various paint types, even on vertical surfaces, thanks to its gel formula. However, it's crucial to avoid contact with sensitive materials like plastics and rubber. This guide provides detailed instructions, usage tips, and troubleshooting advice to help you get the best results.
All features
Brand
Hycote
Extended Product Information
FAQs
How long should I leave the paint stripper on?
Generally, leave it on for about 15 minutes. However, the exact time may vary depending on the paint type and thickness.
What tools do I need?
You will need the Hycote Paint Stripper Spray, a scraper, and possibly some protective gear such as gloves and eye protection.
Can I use this on plastic?
No, it is not recommended for use on plastics or rubber components unless you specifically intend to remove them.
Do I need to sand the surface after stripping?
It depends. After removing the paint, you might need to lightly sand the surface to prepare it for a new coat of paint.
Is it safe to use indoors?
Use in a well-ventilated area, preferably outdoors, or in a well-ventilated workshop.
How should I dispose of the waste?
Dispose of the waste according to local regulations for hazardous materials.
Can I use this to remove car wax?
No, this product is designed for removing paint, varnish, lacquer, and residues, not wax.
What safety precautions should I take?
Wear appropriate personal protective equipment (PPE), including gloves and eye protection. Ensure adequate ventilation.
Troubleshooting
Paint not softening after application.
Ensure sufficient product was applied. Allow more time for the product to work or reapply.
Product is running off vertical surfaces.
Apply a thicker coat to prevent run-off and ensure the surface is not too smooth.
Product is drying before removal.
Work in smaller sections or apply the product in a cooler environment to prevent drying.
Damage to the underlying surface.
Check compatibility with the material and do not leave the product on for too long.
Pros and Cons
Pros
Effective on a wide range of paint types.
Gel formula prevents dripping on vertical surfaces.
Non-chlorinated formula for increased safety.
Versatile use for gaskets and carbon deposits.
Easy to apply via spray.
Breaks down charred oil and other carbon deposits.
Cons
Not suitable for use on plastics or rubber components unless removal is required.
Requires careful application to avoid contact with sensitive materials.
Must be used in a well-ventilated area.
May require multiple applications for heavily layered coatings.
Removal requires a scraper, which may not be readily available.
Setup, Compatibility & Care
Preparation: Ensure the surface is clean and dry. Protect any areas you don't want to strip.
Application: Shake the can well. Spray a liberal, even coat onto the surface you want to treat.
Waiting Time: Allow the product to sit for approximately 15 minutes. Do not allow the product to dry before removal.
Removal: Use a scraper or similar instrument to remove the softened paint or residue. Dispose of waste appropriately.
Compatibility: This product is suitable for use on most paints, including 2-Pack, Acrylic, Cellulose, Vinyl, Alkyd, and Polyurethane. It is not suitable for plastics or rubber components.
Care: Store in a cool, dry place away from direct sunlight. Ensure adequate ventilation during use.