E-Tech Engineering Technik Self-Etch Primer - Grey

The E-Tech Engineering Technik Self-Etch Primer is designed for use on aluminum, stainless steel, galvanized steel, treated or untreated steel, bare metals, and fiberglass.

Yes, lightly sanding the surface with fine-grit sandpaper is recommended to improve adhesion.

Apply 2-3 light coats, allowing each coat to dry according to the manufacturer's instructions before applying the next coat or the topcoat.

This primer is compatible with virtually any primer or top coat of paint, including acrylic lacquers, enamels, and urethanes.

Allow the primer to dry completely according to the manufacturer's instructions before applying the top coat. Drying times may vary depending on temperature and humidity.

The primer is generally not recommended for use on plastic. It is best suited for metal and fiberglass surfaces.

Store the can in a cool, dry place away from direct sunlight and heat. Make sure the can is properly sealed when not in use.

Ensure the surface was properly prepared (cleaned, sanded, and degreased) before applying the primer. Apply a second coat of primer and allow it to dry completely before applying the topcoat.

Apply thinner coats and maintain the correct distance from the surface while spraying. Avoid applying too much primer in one area.

Check if the nozzle is clogged. Clean the nozzle with solvent, or replace it. Ensure the can is properly shaken before use.