NGT XT3 Wireless Bite Alarms - XT-3

Info needed: Please refer to your product manual for the specific battery type required for both the alarms and the receiver.

Each alarm typically has a dedicated sensitivity control button or dial. Consult your user manual for precise instructions on how to cycle through or adjust the sensitivity levels.

The dropback function is designed to alert you when a fish picks up your bait and swims towards you, causing the line to go slack. This type of bite might not trigger a standard alarm, so the dropback indicator is crucial for detecting these subtle takes.

Info needed: While designed for outdoor fishing, the specific waterproof rating is not provided. It's generally advisable to protect electronic devices from heavy rain and avoid submersion.

Info needed: The effective wireless range can vary based on environmental factors and obstacles. Please refer to your product manual for the manufacturer's specified maximum range.

To clean your units, gently wipe them with a soft, damp cloth. Avoid using abrasive cleaners or submerging them in water. Ensure they are completely dry before storing them.

Yes, the NGT XT3 set includes alarms with blue, red, and green LEDs. This allows you to easily assign and distinguish which alarm is signaling a bite.

Ensure both the alarms and receiver have fresh batteries and are powered on. Check that they are within the effective wireless range. If issues persist, try re-pairing the units following the instructions in the manual.

Check the volume and vibration settings on the receiver to ensure they are not turned off or set too low. Replace the receiver's batteries if necessary.

Verify that the unit is powered on and has fresh batteries. Check the LED settings to ensure they are enabled. If a bite occurs, confirm the latching LED feature is functioning as expected.

Adjust the sensitivity setting on the alarm to a lower level. This can help prevent triggers from wind, currents, or minor line movements that are not actual bites.

Ensure your line is correctly positioned on the alarm's roller. Confirm that the dropback sensitivity is adequately set for the conditions. Check for any obstructions preventing smooth line movement.