DZOFILM Octopus Adapter for PL Lens to E Mount Camera - Black

No, the DZOFILM Octopus Adapter is a mechanical adapter. It does not transmit electronic signals, meaning autofocus, aperture control, or lens stabilization data will not function.

While the adapter is designed for PL mount, its construction may allow for the use of some EF mount lenses. However, performance and fit are optimized for PL mount.

The flocked coating acts as a light absorber, minimizing internal reflections and stray light that can degrade image quality, especially when shooting with strong light sources.

Use a clean, dry microfiber cloth to wipe down the exterior and interior surfaces. For stubborn smudges, a slightly dampened microfiber cloth can be used, but ensure the adapter is completely dry before mounting a lens or camera.

The adapter is precisely machined to maintain the correct back focal distance, ensuring that infinity focus is achievable with compatible lenses.

The support foot provides an additional point of contact to help stabilize heavier lenses and reduce the strain on your camera's E-mount bayonet.

Ensure the lens mount surface is clean. Check that the adapter's locking mechanism is fully disengaged before attempting to mount the lens. If the issue persists, it might be a specific lens compatibility nuance; try with a different PL lens if possible.

Confirm the adapter is correctly aligned with the E-mount and fully twisted into its locked position. Inspect the E-mount on your camera for any debris or damage.

Verify the adapter's internal flocking is intact and free of dust. Ensure the lens itself is clean and properly focused. Check that the adapter is securely mounted to avoid any play that could affect focus.

Adjust the position of the support foot to make contact with the lens's built-in support. Not all lenses may perfectly align with the foot, but it should provide some degree of stability.