Ronseal Diamond Hard Clear Satin Wood Varnish - 750ml
This clear interior varnish from the Ronseal Interior diamond hard range can be applied to interio...This clear interior varnish from the Ronseal Interior diamond hard range can be applied to interior using a brush. The varnish dries in just 20 minutes and will cover up to 24 m² per litre on average. Ronseal Interior Varnish is a quick drying varnish with Diamond Hard protection. It delivers superior protection against heat, scratches and water. Quick drying, touch dry in 20 minutes. Re-coat after 2 hours. Protects all interior wood with a beautiful fade resistant finish. Available in Satin, Gloss and Matt. Ronseal Interior Varnish Satin Clear 750ml. Ronseal Interior Satin Varnish Diamond Hard: Unrivalled protection for your interior wood. This water-based varnish boasts a rapid 20-minute touch-dry time, making application quicker and easier than oil-based alternatives. Its Diamond Hard formulation creates a tough and durable barrier that will keep wood safe from knocks and scuffs.
Ronseal Others Interior Varnish White Ash Matt 750Ml£4.49 delivery£19.80Visit shop →
Rustins Clear Quick Dry Poly Varnish Gloss 1Ltr -Tough, Water-Based Finish In Gloss, Matt Or Satin; Durable Protection For Interior Wood, Furniture And FloorsFree delivery in 1–3 days£21.00Visit shop →
Rustins Clear Rustinsquick Dry Poly Varnish Satin 1Ltr -Tough, Water-Based Finish In Gloss, Matt Or Satin; Durable Protection For Interior Wood, Furniture And FloorsFree delivery in 1–3 days£21.00Visit shop →
Ronseal Satin Diamond Hard Interior Varnish - 2.5LFree delivery in 1–3 days£39.98Visit shop →
This guide is for anyone looking to protect and enhance their interior wood surfaces using Ronseal Diamond Hard Clear Satin Wood Varnish. It offers a durable, satin finish, applying easily with a brush and drying quickly. However, proper surface preparation is key for optimal results.
All features
Colour
White
Model Part Number
36871
Brand
Ronseal
Extended Product Information
FAQs
How many coats of varnish should I apply?
For general protection, two coats are usually sufficient. For high-traffic areas, three coats may be preferable.
Can I use this varnish on exterior wood?
No, this varnish is designed for interior use only.
How long does the varnish take to dry?
It typically dries in about 20 minutes, but it's best to allow for sufficient drying time between coats.
How do I clean my brushes after use?
Clean your brushes with the appropriate brush cleaner as recommended by the varnish manufacturer.
What is the coverage of the varnish?
It provides coverage up to 24 square meters per liter, depending on the surface and application method.
Can I apply this varnish over existing finishes?
It is best to remove any existing finishes before applying the Ronseal Diamond Hard Clear Satin Wood Varnish for optimal results.
How should I store the varnish?
Store the varnish in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
Varnish is not drying properly.
Ensure adequate ventilation and check the room temperature. Make sure the varnish hasn't expired.
Varnish is streaky or uneven.
Sand the surface lightly and reapply, using thin, even coats. Avoid applying too much varnish at once.
Varnish is peeling or flaking.
Ensure the surface was properly prepared (cleaned and sanded). Remove loose varnish, sand the area, and reapply.
Pros and Cons
Pros
Dries quickly, saving time on projects.
Provides a durable and protective satin finish.
Easy to apply with a brush.
Offers good coverage, reducing the amount of product needed.
Cons
Requires proper surface preparation for best results.
May require multiple coats for optimal protection.
Satin finish may not be desired by all users.
Setup, Compatibility & Care
Setup:
Preparation: Ensure the wood surface is clean, dry, and free from any previous finishes. Lightly sand the surface and remove dust.
Application: Stir the varnish thoroughly before use. Apply with a brush in the direction of the wood grain.
Drying Time: Allow approximately 20 minutes drying time between coats. Apply additional coats as needed, following the drying instructions.
Cleaning: Clean brushes with the appropriate brush cleaner.