Babysense Add On Camera - MaxView

Yes, this is an add-on camera and requires the Babysense Video Monitor MaxView system (Parent Unit and base camera) to function. It cannot be used as a standalone camera.

You can connect up to three additional cameras to your Babysense MaxView Parent Unit, for a total of four cameras.

The Babysense MaxView Parent Unit typically allows you to cycle through camera views or use a split-screen mode (depending on the specific model's features) to monitor multiple cameras.

Yes, the add-on camera comes with its own power adapter necessary for its operation.

The range is dependent on the main Babysense MaxView Video Baby Monitor system. Refer to your primary monitor's specifications for detailed range information.

Yes, the motorized camera offers remote pan and tilt capabilities, allowing you to adjust the viewing angle from the Parent Unit.

Ensure the Parent Unit is updated and within range. Refer to the main monitor's manual for specific pairing steps. Try resetting both the camera and the Parent Unit.

Check for obstructions between the camera and Parent Unit. Ensure both devices are not too far apart. Minimize interference from other wireless devices.

Verify the camera is properly paired and powered. Ensure the Parent Unit's controls are functioning correctly. Check the connection between the Parent Unit and the camera.

Confirm the power adapter is securely plugged into both the camera and a working electrical outlet. Test the outlet with another device.