Philips 5300 Series 2.1 Soundbar with Wireless Subwoofer - Grey

The wireless subwoofer provides deep, impactful bass for movies and music, and offers flexible placement options in your room without the need for extra cables running to the soundbar.

Yes, the Philips TAB5309/10 soundbar is wall-mountable, and mounting brackets are included. Its ultra-slim design is ideal for wall installations.

It supports advanced audio technologies including Dolby Atmos and DTS Virtual:X for immersive 3D sound, along with standard Dolby Digital and Dolby Digital Plus.

You can connect it using the HDMI ARC port (recommended for best performance) or via the digital optical audio input. Ensure your TV also supports these connection types.

The soundbar uses Bluetooth version 5.4, which provides a stable and efficient wireless connection for streaming audio from compatible devices.

Yes, the soundbar features four EQ sound modes: Movie, Music, Stadium, and Voice, allowing you to optimize the audio for your specific content.

The system delivers a total RMS rated power of 120 W, with the soundbar providing the main audio output and the wireless subwoofer enhancing the low frequencies.

Ensure the soundbar and subwoofer are powered on. Check that the correct audio input (HDMI ARC or Optical) is selected on the soundbar and your TV. Verify TV audio output settings are configured for external speakers and that cables are securely connected.

Ensure the subwoofer is powered on and within range of the soundbar (typically up to 10 meters). Try unplugging both the soundbar and subwoofer from power for 30 seconds, then plug them back in to re-initiate pairing.

Make sure Bluetooth is enabled on your source device. Put the soundbar into Bluetooth pairing mode (refer to manual if needed). If connection fails, turn off Bluetooth on your source device and the soundbar, then try again. Remove previous pairings from your source device.

Check the Total Harmonic Distortion (THD) setting if available via EQ modes. Ensure the soundbar is not set to an excessively high volume. Try a different EQ mode (e.g., Voice for clearer dialogue). Check that audio source files are not corrupted.

Verify the subwoofer is powered on and wirelessly connected. Check if the bass adjustment feature is available and ensure it's not turned down. Ensure the subwoofer is placed on a solid surface and not obstructed.