Hyundai 62cc Petrol Chainsaw - 20" Cutting Bar

Use a mixture of unleaded gasoline and two-stroke engine oil. The ratio is usually indicated on the chainsaw itself or in the user manual. Use the fuel mixing bottle provided.

Use the chain file provided to sharpen each tooth on the chain. Refer to the manual for the correct angles and techniques.

Clean the air filter regularly, especially after heavy use. Refer to the manual for detailed instructions.

Always wear safety glasses, gloves, a helmet with a face shield, and sturdy work boots when operating the chainsaw.

Replacement chains can be found at most hardware stores or online retailers that sell chainsaw accessories. Ensure you get the correct size and type.

Use the side-mounted chain tensioner. Loosen the bar nuts, turn the tensioning screw until the chain is snug, and then tighten the bar nuts.

Warranty information can be found in the user manual or on the manufacturer's website. Typically, it covers defects in materials and workmanship.

Check the fuel tank and ensure it has the correct fuel mixture. Check the spark plug and ensure it is properly connected. Make sure the choke is set correctly, and pull the starter cord firmly.

Adjust the chain tension using the side-mounted tensioner. Ensure the chain is properly seated on the bar and sprocket.

Check the air filter and clean or replace it if necessary. Make sure the fuel filter is clean. Check the spark plug and replace it if it's worn.