Designed with 7 TPI for cutting medium to thick wood materials. The thicker 1.03 mm double bevel g...Designed with 7 TPI for cutting medium to thick wood materials. The thicker 1.03 mm double bevel ground blade offers high-precision and straighter cutting with exceptionally good stability and comfort. The Universal toothing, helps towards long-lasting sharpness, designed with a two component handle that's offers a perfect rubberised grip and good sawing support and can also be used for approximate 45deg and 90deg marking guide. Double Bevel ground for rip and cross cutting Bahco Barracuda Handsaw 500mm (20") in Silver Rubber. The Bahco 244+ Barracuda Handsaw is a high quality general purpose hardpoint saw suitable for cutting softwood, worktops, chipboard and MDF. The Super sharp toothing and thicker blade offer faster cutting with improved stability and precision during use amd the screwed 2-component handle can be used for approximate 45° and 90° marking guide. Blade length 500mm (20 in). Type: Universal hardpoint. Teeth: 7 tpi / 8 Points. Designed and made in Sweden.
Bahco 550 mm Hand Saw, 7 TPIFree delivery in 1–3 days£30.50Visit shop →
Product Information
Full details
This guide is for anyone using the Bahco Barracuda Handsaw 500mm. It helps users cut medium to thick wood materials with precision and comfort. The main benefit is the saw's ability to provide straight cuts due to its thicker blade and universal toothing. However, users should be aware of the saw's specific application for medium to thick wood materials.
All features
Model Part Number
244P-20-U7-HP
Brand
Bahco
Extended Product Information
FAQs
What type of wood is this saw best for?
The Bahco Barracuda Handsaw is best for cutting medium to thick wood materials.
Can the saw blade be resharpened?
No, this saw features hardpoint teeth and cannot be resharpened.
What is the blade length?
The blade length is 500mm (20 inches).
What is the handle made of?
The handle is a two-component design with a rubberized grip for comfort and control.
Can the handle be used as a marking guide?
Yes, the screwed two-component handle can be used for approximate 45° and 90° marking guides.
Where is the saw made?
The saw is designed and made in Sweden.
Troubleshooting
Saw blade binds or sticks during cutting.
Ensure the saw is aligned correctly with the cut. Reduce pressure and maintain a consistent sawing motion. Check for any obstructions in the kerf.
Cuts are not straight.
Check that the blade is straight and not bent. Use the handle's marking guides if necessary. Ensure even pressure throughout the cut.
Pros and Cons
Pros
High precision and straight cutting due to the thicker blade.
The rubberized handle provides a comfortable and secure grip.