Stripe Wallpaper - Orange - E40915

Use a good quality paste recommended for the type of wallpaper you have purchased. Follow the paste manufacturer's instructions for mixing and application.

While the wallpaper is suitable for most interior walls, use it in bathrooms with adequate ventilation to prevent moisture damage. Sealing the wallpaper can improve its longevity in humid environments.

Soak the wallpaper with warm water and allow it to penetrate. Then, carefully peel off the wallpaper. A wallpaper removal solution may also be necessary for stubborn areas.

Pattern matching can be tricky. When cutting, make sure to align patterns correctly and account for any waste. If patterns are misaligned, trim and reapply the paper, ensuring a good match. A bit of overlap might be required in some cases.

Gently wipe the wallpaper with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the surface. Always test the cleaning method on a small, inconspicuous area first.

Apply the wallpaper to the corner, allowing a small overlap onto the adjacent wall. Then, cut down the corner using a sharp blade for a clean finish. Ensure the next strip aligns seamlessly.

Measure the height and perimeter of the walls you plan to cover. Use these measurements to calculate the total square footage. Then, consider the wallpaper’s pattern repeat and waste to determine the necessary number of rolls.

Use a wallpaper smoother to push out air bubbles. For stubborn bubbles, carefully prick with a needle and smooth again.

Ensure seams are butted tightly together during application. Use a seam roller for a seamless finish, and wipe away excess paste.

Make sure the wall is properly prepared and primed. Ensure you are using the correct type of wallpaper paste and applying it evenly.