DMR Vault Flat Pedal - Black

Use the provided pin key or a suitable hex key to unscrew and adjust the pins to your desired height and placement. Experiment with different configurations to find what works best for you.

You will need a pedal wrench, a hex key set, a pin key, bicycle bearing grease, and a brush for cleaning.

Depending on usage and conditions, service the pedals every 6-12 months or as needed. If you notice any roughness or play in the pedals, service them immediately.

Yes, replacement pins are available from DMR retailers.

The warranty information can be found on the DMR website or from your point of purchase.

These pedals are compatible with most flat-pedal mountain biking shoes.

Use a brush and water to remove dirt and debris. Avoid using harsh chemicals or pressure washers.

Refer to the DMR Vault pedal service guide or consult a professional bike mechanic for bearing replacement.

Check and tighten the pedal axles. If the issue persists, the bearings may need to be replaced. Refer to the DMR Vault pedal service guide.

Adjust the pin height and placement. Experiment with different pin configurations to find the optimal grip for your shoes and riding style. Ensure the pins are not worn or damaged. Replace if necessary.

Clean the pedals and re-grease. This is usually due to dirt ingress. If this doesn't help, the bearings might need replacing.