GoPro Protective Housing - MISSION 1 SERIES

No, this Protective Housing is specifically designed for the GoPro MISSION 1 PRO and MISSION 1 series cameras.

The housing is waterproof down to 60 meters (approximately 196 feet).

Yes, the flat glass front is designed to allow full touchscreen functionality.

The housing is engineered to maintain high video and sound quality, though some minimal reduction in audio capture is expected due to the protective seal.

Rinse with fresh water after use in salt or chlorinated water. Clean the exterior with a soft, damp cloth. Crucially, ensure the rubber seals are free of debris before each use and that the latch is securely closed.

Yes, the housing features built-in dual mounting fingers that allow you to attach it to standard GoPro mounts.

Ensure the camera and the inside of the housing are completely dry and at a similar temperature before sealing. Condensation can occur if there's a significant temperature difference between the camera and the surrounding air when the housing is sealed.

Ensure the camera is completely dry before placing it in the housing. Avoid significant temperature fluctuations. Consider using anti-fog inserts if extreme conditions persist.

Immediately remove the camera. Inspect all seals for damage, debris, or improper seating. Ensure the latch is fully closed. Test without the camera by submerging it in shallow water for a short period.

Verify that the flat glass lens is clean and free of smudges or water droplets. Ensure the camera is properly seated within the housing, as misalignment can sometimes affect sensor interaction.

The housing is designed to minimize audio impact, but some reduction is expected due to the seal. Ensure the microphone ports are clear of obstruction. For critical audio, consider removing the camera from the housing.