Fine Decor Bianco Fluted Marble Wallpaper - White

Use a high-quality, pre-mixed or powder adhesive specifically designed for non-woven (paste-the-wall or paste-the-paper) wallpapers. Refer to the adhesive manufacturer's recommendations.

Each roll covers approximately 5.2 square metres. Measure the height and width of your walls, divide the total wall area by 5.2, and add 10-15% extra to account for the 53cm drop match pattern and any cutting errors.

While washable, this wallpaper is best suited for main living areas. For areas with high humidity or potential splashes like kitchens and bathrooms, specialized, moisture-resistant wallpapers are generally recommended.

It is generally best to remove old wallpaper before applying new wallpaper to ensure proper adhesion and a smooth finish. Ensure the wall beneath is clean and sound.

This wallpaper is peelable. Start at a seam and peel the wallpaper downwards. If any residue remains, it can usually be washed off with warm water.

A drop match means that the pattern on each subsequent strip of wallpaper must align with the pattern on the previous strip. The repeat is 53cm, meaning you need to match the pattern every 53cm down the strip.

Gently lift the affected area and re-smooth towards the edge with a wallpaper brush. For persistent bubbles, a small pinprick to release air may be used, followed by firm pressure.

Check that the first strip was hung perfectly vertical. Ensure the correct repeat (53cm) is being followed for each subsequent strip. Trim carefully to achieve alignment.

Use a sharp, fresh blade in your utility knife. Cut carefully and deliberately along edges.

Ensure the wall surface was properly prepared (clean, dry, and primed if needed) and the correct type of wallpaper adhesive was used. Reapply adhesive to the dry section or wall if necessary.