Best current price£4.62from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£4.62Visit shop LAPP 70261137 current cable grey 2.00 m right-angle plug stripped end
Visit shop24 offers from £4.62 - £99.64
View price history by clicking the chart icon.
The LAPP ÖLFLEX Spiral 400 P cable is designed for demanding environments in machinery, mechanical engineering, and automatic control systems, offering a shielded solution with minimal dimensions and high restoring forces. Its key benefit is its enhanced chemical, oil, and abrasion resistance, making it suitable for harsh industrial conditions. A potential consideration is its limited unextended length which may require careful planning for dynamic applications.
| Colour | Grey |
|---|---|
| Model Part Number | 70002622 |
| Brand | Lapp |
The LAPP ÖLFLEX Spiral 400 P cable can extend up to three times its original, unextended length.
The cable is UV resistant, making it suitable for applications exposed to sunlight. However, its primary design is for industrial machinery and control systems, and its operating temperature range for flexing should be considered.
It offers high resistance to benzols, benzines, and other substances listed in Appendix T1. It is also resistant to oils and abrasion.
Yes, the ÖLFLEX Spiral 400 P is designed as a control and power cable.
This model features 2 cores with a core size of 0.75 mm².
The cable is designed for flexing within a temperature range of 5 to 50 °C.
Clean the cable with a dry or slightly damp cloth. Avoid aggressive cleaning agents unless confirmed to be compatible.
Check if the cable is over-extended beyond its 3x unextended length limit. Ensure there are no obstructions or kinks in the cable path. Verify it's not being used outside the 5-50°C flexing temperature range.
Confirm that the cable's shielding is properly grounded at both ends. Ensure the cable is not routed too closely to high-power electrical sources or sources of strong electromagnetic fields.
Review the specific chemicals present in the operating environment against the resistance list in Appendix T1. If the chemical is not listed as resistant, the cable may be unsuitable. Replace the cable if significant degradation is observed.
The cable might have been subjected to temperatures outside its optimal flexing range for an extended period. Allow the cable to rest at room temperature for several hours. If the issue persists, the material's properties may have been permanently affected.
Setup: Ensure the cable is installed within its specified temperature range of 5-50°C for flexing. The drawn ends should be connected according to standard electrical practices for signal and power transmission. Due to its spiral nature, avoid over-extending the cable beyond three times its unextended length to prevent damage and maintain its restoring force.
Compatibility: This cable is designed for use in machinery, mechanical engineering, and automatic control systems. It is compatible with control and power applications requiring shielded cables. The specific core size (0.75 mm²) and number of cores (2) should match the requirements of the connected equipment.
Care: Clean the cable sheath with a dry or slightly damp cloth. Avoid using harsh solvents or cleaning agents that are not listed in Appendix T1, as these could degrade the polyurethane material. Inspect the cable periodically for any signs of physical damage or wear, particularly at the points of maximum extension.
