CDA HG6351SS 58cm Gas Hob - Silver

Turn the control knob to the desired burner and push it in while turning it counter-clockwise to the maximum flame setting. Hold the knob in for a few seconds until the burner lights. If your hob has automatic ignition, this will happen automatically.

This hob is compatible with mains gas. Check with a qualified gas engineer if you need to convert it for a different type of gas.

Remove the pan supports and wash them with warm, soapy water. Avoid using abrasive cleaners.

The flame failure device will automatically shut off the gas supply. Turn off the burner and allow the hob to cool before relighting.

Yes, but ensure the cookware has a flat base and is stable on the pan supports. The pan should not be too small for the burner.

The model number is located on the rating plate of the hob, usually on the underside or back.

Please refer to the product documentation for warranty information.

Check the gas supply and ensure the burner caps are correctly positioned. Clean burner ports if blocked.

Clean the burner and ensure the burner cap is correctly positioned. Adjust the flame settings using the control knobs.

Check the power supply to the hob and ensure the electronic ignition is functioning. Clean the igniter.