Kenable Network Cable - CAT6

This CAT6 extension cable supports speeds up to 10/100/1000 Mbps (Gigabit Ethernet). However, the actual speed achieved will depend on the capabilities of your entire network, including your router, switch, and connected devices.

Yes, the full copper construction makes this cable suitable for Power over Ethernet (PoE) applications, allowing it to transmit both data and power.

Yes, this is an RJ45 extension cable designed to extend standard Ethernet cables. It connects to existing RJ45 male plugs and provides an RJ45 female socket for your network connection.

CAT6 cables offer higher performance than CAT5e, supporting higher frequencies and enabling faster speeds (up to 1000Mbps over longer distances) and better crosstalk reduction. This cable is specifically CAT6.

The cable is made with 26AWG wire and has a 6mm diameter, providing a robust build. However, like all cables, it should be handled with care to avoid damage from excessive pulling or sharp bends.

No, this is a passive network cable. It requires no drivers or software and works on a plug-and-play basis with any compatible RJ45 Ethernet port.

Ensure both ends of the cable are securely plugged into the correct ports. Verify that the connected network devices (router, switch, computer) are functioning correctly. Try a direct connection without the extension cable to rule out issues with the network source. Check if the cable is damaged.

Confirm that your network infrastructure (router, modem, switch) supports gigabit speeds. Ensure the cable is not bent sharply or damaged. Check for other network congestion issues. Try a shorter, known-good Ethernet cable to compare performance. Clean the RJ45 connectors.

Ensure you are using an RJ45 port. Verify that the cable is a standard Ethernet extension cable and not a different type of connector. Do not force the connector; if it doesn't fit easily, check for obstructions or alignment issues.