Kärcher Rain Box - 15m Hose

The Kärcher Rain Box includes a 15-meter Kärcher Rain System hose and a 10-meter drip hose.

Yes, the drip collars can be attached to the Kärcher Rain System hose and adjusted individually to regulate water volume from 0-10 liters per hour.

No, all parts of the Kärcher Rain Box are designed for tool-free assembly and installation.

The system is designed to run with water pressure up to 4 bar. It requires a minimum pressure to operate effectively.

Yes, the Kärcher Rain Box is part of the Kärcher Rain System and can be easily expanded with additional Kärcher Rain System components.

To prevent damage from freezing, it is essential to completely drain the system before winter. Disconnect from the tap, lay hoses flat to allow water to run out, and store components in a frost-free location if possible.

The Kärcher Rain Box is ideal for watering flower beds, vegetable patches, hedges, bushes, and planting in rows.

Check that the tap is fully open. Ensure the filter is clean and not clogged. Verify all connections are secure and that water pressure is at least 1 bar and does not exceed 4 bar. Check that drip collars are not fully closed.

Ensure drip collars are correctly installed on the Kärcher Rain System hose. Adjust the water volume regulation on the drip collar for each plant. Check for blockages in individual drip collars.

Verify the T-piece connected to the drip hose is set to allow adequate water flow. Ensure the drip hose is laid out on a relatively level surface. Check for any kinks or obstructions in the drip hose.

Ensure you are using the correct Kärcher Rain System components. Check for any debris in the connection points. Make sure the connections are aligned properly before pushing them together firmly.