PolyX Polycarbonate Sheet Solid - 610mm x 610mm x 2mm Clear

Yes, you can use a jigsaw with a fine-toothed blade. Use low-to-medium speed to prevent heat buildup and melting of the edges.

Polycarbonate naturally resists some UV rays, but for long-term outdoor exposure, verify if your specific installation environment requires an extra UV-stabilized coating.

Use a soft, non-abrasive cloth dampened with warm water and a small amount of mild dish soap. Never use glass cleaners that contain ammonia.

While it can be cold-bent, excessive bending may cause stress marks. For very tight curves, you may need to use a heat-bending technique or select a thinner sheet.

Polycarbonate is significantly more impact-resistant and flexible than acrylic, which is stiffer but more prone to shattering under heavy impact.

Minor surface scratches can often be buffed out with a specialized polycarbonate polishing compound, but deep scratches may be permanent.

Ensure the sheet is properly clamped to a flat surface and use a fine-toothed blade at a steady speed to minimize vibration.

Polycarbonate expands and contracts with temperature changes. Ensure you have left enough clearance in your mounting frame to allow for thermal movement.