Rigid Angle - 50mm - White

Name: Rigid Angle - 50mm - White
Brand: FloPlast
SKU: qr2e57kvcc
Availability: InStock

These rigid angles are designed for use in a wide range of internal and external applications. The...

Best current price£22.42from Professional Building Supplies

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Professional Building Supplies£22.42Visit shop

Freefoam White Pvc Rigid Angle - 50Mm X 5Mtr

Visit shop

All Offers

2 offers from £22.42

View price history by clicking the chart icon.

Professional Building SuppliesFreefoam White Pvc Rigid Angle - 50Mm X 5Mtr

Free delivery in 1–3 days

£22.42

Visit shop

PVC Cladding UKFreefoam White Pvc Rigid Angle - 50Mm X 5Mtr

Free delivery in 1–3 days

£22.42

Visit shop

Product Information

Full details

The FloPlast 50mm White Rigid Angle is an essential component for DIY enthusiasts and trade professionals looking to achieve a clean, professional finish on corners and edges. It provides a durable, low-maintenance solution for protecting exposed angles in both interior and exterior environments. While it offers excellent versatility, users should note that the rigid nature of the profile requires precise measuring and cutting to ensure flush alignment on non-perfect surfaces.

All features

Model Part Number	FZR50
Brand	FloPlast

Extended Product Information

FAQs

Can I paint this rigid angle?

While the white finish is designed to be maintenance-free, if you wish to paint it, you should use a plastic-specific primer first to ensure the paint adheres properly.

Is this suitable for external use?

Yes, the PVC material is designed to be weather-resistant and is suitable for external applications like trim around window frames or fascia boards.

What is the best way to cut this to size?

A fine-toothed hacksaw or a miter saw with a plastic-cutting blade provides the cleanest, most accurate cuts.

Will this angle flex around curved corners?

No, this is a rigid profile and is designed specifically for 90-degree corners. It will not bend around curves.

Can I use screws instead of adhesive?

While adhesive is recommended for a seamless look, you can use countersunk screws if you pre-drill the plastic, though you must be careful not to overtighten and crack the profile.

Troubleshooting

Adhesive not bonding effectively

Ensure the surface is completely dry and free from dust or grease; consider lightly sanding glossy surfaces before applying the adhesive.

Visible gaps between angle and wall

If the wall is slightly uneven, use a flexible decorators caulk or colored silicone to bridge the small gap between the plastic and the wall surface.

Pros and Cons

Pros

Easy to cut and shape with standard hand tools
Weather-resistant material suitable for outdoor exposure
Maintenance-free finish that does not require painting
Provides a clean, professional aesthetic for corner joints

Cons

Rigid profile does not flex to accommodate uneven walls
Requires proper surface preparation for adhesive longevity
White finish may show dirt in high-traffic outdoor areas

Setup, Compatibility & Care

To install the rigid angle, start by measuring the area precisely and cutting the plastic using a fine-toothed hacksaw to avoid splintering. Before applying adhesive, ensure the surface is clean, dry, and free of dust or grease.

Installation Steps:

Cut the angle to the required length.
Apply a bead of silicone or adhesive to the inside of the angle.
Press firmly against the corner or edge.
Use masking tape to secure the profile until the adhesive cures.

For ongoing maintenance, the profile is simple to keep clean. Wipe down with a soft cloth and a mild soap-and-water solution; avoid using abrasive chemicals or scouring pads, as these can scratch the smooth PVC surface and cause dirt to accumulate over time.