Bedec Multi Surface Paint - Oxford Blue - Satin - 2.5L

No, it is a self-priming and self-undercoating formula, so it can be applied directly to most prepared surfaces.

Yes, it is suitable for metals, though ensure the radiator is turned off and completely cold during application and curing.

Yes, once fully cured, the satin finish is durable and can be cleaned with a damp, non-abrasive cloth.

Yes, it adheres well to plastics, but ensure the UPVC is thoroughly cleaned and lightly keyed with sandpaper first.

Two coats are generally recommended for full opacity and optimal durability, especially when covering a contrasting color.

Yes, as a water-based paint, it has low VOC content and minimal odor, making it safe for indoor environments when well-ventilated.

The surface was likely not sanded enough. Sand with fine-grit sandpaper to create a better mechanical key and reapply.

Apply thinner coats and use a high-quality synthetic brush. Alternatively, add a very small amount of water to improve flow, or use a foam roller for a smoother finish.

Work in smaller sections and avoid painting in direct sunlight or very hot conditions which accelerate drying time.