Bond It Xtreme Silicone Sealant - White

The Bond It Xtreme White Anti-Mould Silicone Sealant provides up to 10 years of protection against mould growth.

It is suitable for use on enamel, tiles, glass, stainless steel, and acrylics.

Ensure the surfaces are clean, dry, and free from loose debris, old sealant, grease, and oil. Use a suitable cleaner and degreaser.

Cut the nozzle at a 45-degree angle. Insert the cartridge into a sealant gun and apply evenly. Smooth with a tool or a wet finger.

Allow the sealant to cure completely, typically around 24 hours, before exposing it to water or cleaning products.

No, this sealant is not designed to be painted over.

Clean excess sealant with a damp cloth before it cures. Once cured, remove excess with a sharp blade.

Check for moisture sources. Remove and reapply the sealant, ensuring proper surface preparation and application.

Ensure the surface is clean, dry, and free from any contaminants. Consider using a primer if necessary.

Ensure the sealant has been applied correctly. Check the area for persistent moisture sources and address them. In extreme cases, consider removing the old sealant and reapplying.

Ensure the sealant is fully cured. If the cracking continues, remove the old sealant and reapply, ensuring proper joint movement accommodation.