This high-strength, red threadlocker is an all-purpose, permanent adhesive designed for securing t...This high-strength, red threadlocker is an all-purpose, permanent adhesive designed for securing threaded fasteners that can be disassembled with regular hand tools. It solidifies in the absence of air when applied to tightly fitting metal surfaces. Suitable for bolts and nuts up to 25 mm in diameter, it prevents them from loosening due to vibration and provides a seal against leaks and corrosion. This product is robust enough to handle severe shocks, vibrations, and harsh chemical or environmental conditions.
This guide is for anyone using VTech High Strength Threadlocker - Red to secure threaded fasteners. It provides a permanent, reliable hold, preventing loosening from vibration and sealing against leaks and corrosion. Keep in mind that this threadlocker provides a permanent hold and requires tools for disassembly.
All features
Colour
Red
Model Part Number
871
Brand
VTech
Extended Product Information
FAQs
What is the shelf life of VTech High Strength Threadlocker - Red?
Refer to the product label for the expiration date.
Can I use this threadlocker on plastic?
No, this threadlocker is designed for metal fasteners only. Check the product specifications for material compatibility.
How do I remove the threadlocker?
Disassembly requires tools. Heat may be required to break the bond. This threadlocker provides a permanent hold.
What temperature range can this threadlocker withstand?
Refer to the product specifications for temperature limits.
What size fasteners can I use this with?
Suitable for bolts and nuts up to 25 mm in diameter.
How long does it take for the threadlocker to cure?
Cure time varies based on temperature. Refer to the product information for details.
Can I use this threadlocker on stainless steel?
Yes, this threadlocker is suitable for use with stainless steel.
Troubleshooting
Fastener won't tighten.
Ensure that the threads are clean and that the correct amount of threadlocker was used. Reapply if necessary.
Fastener loosens over time.
Check the application and torque specifications. Ensure proper application of threadlocker.
Difficulty in disassembly.
Use appropriate tools and apply sufficient force. Heat may be required. Note that this is a permanent bond.
Pros and Cons
Pros
Permanent bond for reliable fastener security.
Protects against leaks and corrosion.
Withstands harsh environmental conditions.
Easy to apply.
Designed for use with bolts and nuts up to 25mm in diameter.
Cons
Requires tools for disassembly.
Permanent bond may be undesirable in some situations.
Not suitable for all materials.
Can be messy if not applied carefully.
Setup, Compatibility & Care
Preparation: Ensure that the threaded surfaces are clean and free of oil, grease, and other contaminants.
Application: Apply a sufficient amount of threadlocker to the threads of the fastener.
Assembly: Assemble the parts and tighten the fastener to the manufacturer's recommended torque specification.
Curing: Allow the threadlocker to cure fully before subjecting the joint to stress. Cure time varies depending on the temperature.
Compatibility: Suitable for use with most metals. Check the product data sheet for specific material compatibility information.
Care: Store the threadlocker in a cool, dry place. Avoid contact with skin and eyes. If contact occurs, rinse thoroughly with water and consult a doctor if irritation persists.