Fridgemaster Tall Larder Fridge - Energy Class E - MTL55242E

Auto defrost means that the fridge automatically prevents frost and ice build-up on the interior walls. It periodically melts any frost, and the water evaporates, eliminating the need for you to manually defrost the appliance, saving time and maintaining cooling efficiency.

It is generally not recommended to place this larder fridge in an unheated garage or shed. Refrigerators are designed to operate within specific ambient temperature ranges (climate classes). If the ambient temperature drops too low (e.g., below 10°C), the fridge's compressor may not cycle on frequently enough, affecting its ability to maintain proper cooling.

For best results, unplug the fridge. Remove all food items and shelves. Wipe down the interior with a soft cloth dampened with a solution of warm water and a mild, unscented dish soap or baking soda. Rinse with clean water and dry thoroughly before plugging it back in and returning food.

The E energy efficiency class indicates good energy performance. While specific kWh consumption can vary based on usage and environment, an E-rated appliance is designed to operate efficiently, helping to keep your electricity bills lower compared to less efficient models. For exact annual consumption, please refer to the product's energy label or user manual.

Many larder fridges offer reversible doors. Please consult the instruction manual provided with your Fridgemaster MTL55242E or check the product specifications online to confirm if this model supports door reversal and for detailed instructions on how to perform the procedure.

A larder fridge is a refrigerator that consists solely of a fresh food compartment, without any integrated freezer section. It's designed for maximum fresh food storage. In contrast, a fridge freezer combines both a fresh food refrigeration section and a separate freezer compartment in one appliance.

Check if the power cord is securely plugged in and the circuit breaker hasn't tripped. Ensure the temperature setting is correct (usually between 3-5°C). Verify the door seals are tight and not letting warm air in. Make sure the fridge is not overpacked, obstructing air circulation.

Check if the fridge is level; adjust the leveling feet if necessary. Ensure there's adequate clearance around the unit and it's not touching walls or cabinets. A slight humming from the compressor is normal, but loud rattling or grinding requires professional inspection.

This often indicates a blocked drain hole at the back of the fridge. Use a small, soft object (like a cotton bud or pipe cleaner) to gently clear the drain hole. Ensure the fridge is level, as tilting can cause water to run off incorrectly.

Check for obstructions such as food items or shelves preventing the door from closing fully. Inspect the door gasket/seal for tears, debris, or stiffness. Clean the gasket thoroughly. If torn, it may need replacement.

The temperature setting might be too low. Adjust it to a warmer setting (e.g., from 1°C to 3°C). Ensure food items are not placed directly against the cold back wall of the fridge, especially sensitive items like leafy greens.