Telescopic Tree Pruner & Lopper - VonHaus

Locate the locking mechanism on the pole and unlock it. Extend the pole to your desired length and re-lock the mechanism.

The tree pruner can cut branches up to 4cm in diameter.

Use a sharpening file or stone. Follow the blade's angle for the best results, and always wear gloves.

Store the pruner in a dry place, ideally indoors or in a shed, to prevent rust and damage.

The pruner is suitable for most common garden trees and shrubs. However, it's most effective on branches up to 4cm thick.

Clean the blades after each use, and lubricate them periodically with oil to maintain their cutting ability.

The pull cord is replaceable. Contact customer service or a local hardware store for a replacement cord and instructions.

Check the blade for damage or bluntness. Sharpen or replace the blade if necessary. Ensure the branch is within the tool's cutting capacity.

Tighten the locking mechanism on the pole. If it's damaged, replace it.

Clean the rust with a wire brush and apply a protective oil coating. Ensure the tool is stored in a dry place.