Setup, Compatibility & Care
Preparation: Ensure all surfaces are clean, dry, and free from dust, grease, and flaking paint. Fill any cracks or holes and sand smooth. Apply a suitable primer if necessary, especially on new or previously painted surfaces.
Application: Stir the paint thoroughly before use. Apply evenly using a brush, roller, or spray. For best results, apply two coats, allowing adequate drying time between coats.
Compatibility: Suitable for use on all normal interior wall and ceiling surfaces, including plaster, plasterboard, and previously decorated surfaces. Not recommended for high-moisture environments without appropriate preparation.
Care: Clean brushes, rollers, and equipment with water immediately after use. Wipe down walls with a clean, damp cloth if minor marks occur. Avoid harsh scrubbing.