Hills Supadry Hoist Ground Socket - HLS164221

The socket is designed to fit Hills Supadry Hoist poles with a 50.8mm diameter.

You install the socket by digging a hole, placing the socket in the hole, pouring concrete around the socket, and letting it cure.

You will need the ground socket, concrete, and tools for digging the hole.

Refer to the concrete manufacturer's instructions for the recommended curing time.

Check the concrete installation for stability and ensure the locking collar is secure.

Inspect the socket and surrounding concrete regularly and keep the socket clean. Ensure the protective cap is in place when the hoist is not in use.

No, this socket is specifically designed for Hills Supadry Hoist poles.

Check the concrete installation for proper curing and stability. Ensure the ground socket is level and that the locking collar is securely fastened.

Check for any obstructions or debris inside the socket. Ensure that the pole diameter matches the socket's specifications.

Clean the socket and cap to remove any dirt or debris. If the issue persists, check for any damage to the cap or socket.