Patagonia Swiftcurrent Expedition Zip Front Stockingfoot Waders - Patagonia

Rinse your waders thoroughly with fresh water after each use. Use a mild soap if necessary, and avoid using harsh chemicals or detergents. Allow them to air dry completely before storing.

Use a wader repair kit. Clean and dry the area around the leak, apply the patch, and allow it to cure according to the kit's instructions.

Patagonia offers a warranty against manufacturing defects. Contact Patagonia's customer service for warranty details and assistance.

Yes, but be sure to rinse them thoroughly with fresh water after each use to remove salt and prevent corrosion.

Store your waders in a cool, dry place, away from direct sunlight. Avoid folding them tightly; hanging them is the best option.

The front zip allows for easy entry and exit, and provides convenience for relief without removing the waders.

Hang them in a well-ventilated area, away from direct sunlight or heat, allowing them to air dry completely.

Inspect the waders for punctures or tears. Small leaks can often be repaired with a patch kit designed for waders. For larger leaks, contact Patagonia for repair or replacement.

Clean the zipper with fresh water and lubricate it with a waterproof zipper lubricant. Ensure no debris is caught in the zipper teeth.

Ensure you are wearing appropriate layering underneath the waders. Add additional layers for colder conditions. Consider using insulated wading boots.

Check your sizing against the Patagonia size chart. If the waders are consistently too tight, you may need a larger size. Ensure you have adequate room for layering.