Soudal B2 Fire Rated Expanding Foam Hand Held 750ml

The foam has a cutting time of approximately 30 minutes, but full cure can take up to several hours, depending on environmental conditions.

Yes, once the foam is fully cured, it can be painted over. Use a paint that is compatible with polyurethane foam.

The foam is certified to EN1366-4 for fire resistance up to 2 hours, depending on the joint configuration.

Yes, this foam is suitable for both interior and exterior applications.

The foam has an acoustic rating of 58 dB.

Uncured foam can be cleaned up with a foam cleaner or acetone. Cured foam can be trimmed with a knife.

Wear gloves, eye protection, and appropriate clothing. Ensure adequate ventilation during application. Avoid contact with skin and eyes.

Store in cool and dry conditions between +5°C and +25°C. Avoid direct sunlight and extreme temperatures.

Ensure the can is shaken well before use. Check the expiration date. The surface might be too dry; slightly dampen it before application.

Apply the foam sparingly. Use the applicator nozzle correctly. If needed, protect surrounding areas with tape.

Ensure the surface is clean and free of dust, oil, or loose particles. Slightly dampen the surface before application. In some cases, a primer may be needed for very smooth or non-porous surfaces.