Rustins Quick Dry ASAP All Surface All Purpose Paint Satin Black is a water-based paint that dries...Rustins Quick Dry ASAP All Surface All Purpose Paint Satin Black is a water-based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. Can be used indoors and outdoors on multiple surfaces. It is touch dry in 30 minutes and re-coating time is approximately 2-3 hours. Type: A high performance acrylic satin paint. Intended Use: For use on a wide range of surfaces such as UPVC, most plastics, timber, metal, tiles, stone and bricks without the need of a primer. Special Features: Quick drying and easy to apply to on an extensive range of surfaces both indoors and outdoors. Size: 250ml. Rustins All Surface All Purpose Paint is a water-based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. Water based and quick drying, Low odour, Flexible satin finish, Resists flaking and peeling. No primer needed for: Wood, Metal, Plastic, Galvanised Steel, UPVC, Lead, Plaster, Tiles, Glass, MDF, Melamine, Masonry. Available in sizes: 250ml, 500ml and 1L. Available in colours Black, Blue, Cream, Green, Red & White. Also available in 50ml in Satin White, Black and Grey.
Best current price£6.61from Blueperry agriculture (UK)
This guide is for anyone looking to use Rustins ASAP All Surface All Purpose Paint in Black. It provides a quick-drying, flexible, and versatile solution for painting various surfaces both indoors and outdoors. A key benefit is its ability to adhere to surfaces without needing a primer, saving you time and effort. Note that, while versatile, it's essential to ensure the surface is properly prepared for optimal results.
All features
Colour
Black
Model Part Number
ASAPBL250
Brand
Rustins
Extended Product Information
FAQs
What surfaces can I use this paint on?
The paint can be used on a wide range of surfaces including UPVC, most plastics, timber, metal, tiles, stone, and bricks.
Do I need to use a primer?
No, a primer is generally not needed on most surfaces. However, ensure the surface is clean and properly prepared.
How long does it take for the paint to dry?
It is touch dry in about 30 minutes and recoat time is 2-3 hours.
What is the finish like?
The paint dries to a flexible satin finish.
How do I clean the brushes after use?
Clean brushes and equipment with water immediately after use.
Is this paint suitable for outdoor use?
Yes, it is suitable for both indoor and outdoor use.
What sizes is this paint available in?
The paint is available in 250ml, 500ml and 1L sizes. 50ml sizes are available in Satin White, Black and Grey.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is thoroughly cleaned and lightly sanded before application. Allow adequate drying time between coats.
Paint is flaking or peeling.
Make sure the surface is properly prepared, and that the paint has fully dried and cured. Incompatible surfaces could be the issue.
Uneven finish.
Apply the paint evenly, avoiding excessive build-up. Use a good quality brush or roller.
Pros and Cons
Pros
Quick drying time.
Suitable for various surfaces without a primer.
Flexible satin finish resists flaking.
Water-based, low odor formula.
Easy to apply.
Cons
Coverage may vary depending on the surface.
Multiple coats might be needed for complete opacity on some surfaces.
Not available in a wide range of sizes for all colours.
Surface preparation is still important for best results.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from loose paint, rust, or grease. Lightly sand glossy surfaces to improve adhesion.
Application: Stir the paint thoroughly before use. Apply with a brush, roller, or spray gun. Two coats are generally recommended for full coverage, allowing 2-3 hours between coats.
Drying Time: The paint is touch dry in approximately 30 minutes. Recoat after 2-3 hours.
Cleaning: Clean brushes and equipment with water immediately after use.
Compatibility: Suitable for use on wood, metal, plastic, galvanised steel, UPVC, lead, plaster, tiles, glass, MDF, melamine, and masonry.
Storage: Store in a cool, dry place. Keep out of reach of children.