SecureFix Direct Heavy Duty Swivel Hasp & Staple 14" - Silver

No, fixings are not included with this product. You will need to purchase suitable screws or bolts separately based on the material you are mounting the hasp and staple to.

The swivel mechanism allows the hasp to lock behind a retaining bar, offering an additional layer of security by covering and protecting the padlock from tampering or cutting.

Yes, it is suitable for a wide range of materials including wood, provided you use appropriate wood screws or bolts for secure installation.

The galvanised finish provides good protection against rust and corrosion, making it suitable for outdoor use. However, extremely harsh environments like direct coastal salt spray may require occasional maintenance to prevent accelerated wear.

The product information does not specify a maximum padlock shackle diameter. It is recommended to test with your intended padlock to ensure it fits through the holes in the hasp and staple when closed.

Clean with a damp cloth. Avoid using abrasive chemicals or tools that could scratch or damage the galvanised coating.

The hasp is 360mm long (approx. 14 inches), 55mm wide, and 20mm high. The staple is 65mm long, 55mm wide, and 45mm high. The plate thickness is 4mm.

Check for any obstructions. Apply a small amount of lubricant (e.g., WD-40 or light oil) to the swivel joint and work it back and forth.

Re-check the mounting positions. Ensure the door/gate and frame are not warped and that the hasp and staple are mounted parallel to each other. Minor adjustments to mounting holes may be needed.

Tighten all screws or bolts. If the holes have become enlarged, consider using slightly larger fixings or appropriate wall plugs/anchors for the material.

While galvanised, prolonged exposure to harsh conditions can cause surface rust. Clean the area gently with a soft brush and apply a metal-safe lubricant or appropriate rust inhibitor to the affected spot.