Heavy Duty Fence Panel Security Brackets - Pack of 2

Screws are not included. The type and size will depend on your specific post material (wood or concrete) and desired depth of fix. Typically, wood screws of around 2"-3" or appropriate masonry screws with anchors for concrete posts are suitable.

These brackets are specifically designed for 4" (100mm) posts. Using them on different sized posts may result in an insecure fit or difficulty in installation.

Each pack contains two heavy-duty security brackets.

They significantly deter removal by preventing the panel from being lifted off the post. However, determined individuals with tools may still be able to remove them. They are designed to add a substantial layer of security.

No, these brackets are designed for use with 4" (100mm) concrete or wooden posts and require screws to fix them.

You can clean them with a damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the galvanised coating.

The brackets are made from 1.5mm thick carbon steel.

Ensure you are using the correct length and type of screws for your post material. The bracket must be firmly attached to the post itself.

Check if the panel is warped or if the screws securing the bracket are fully tightened. Ensure the bracket is seated correctly against the panel.

While the galvanised finish offers protection, extreme conditions can eventually cause minor surface rust. Clean with a soft brush and consider applying a metal protector if significant corrosion is noted.

Slightly loosen previously installed screws or adjust the panel position incrementally to achieve alignment. Ensure the post is plumb and stable.