LAPP OeLFLEX® CLASSIC 110 Control lead - 5 G 1.5 mm² - Grey

This cable is primarily designed for control and connection purposes under industrial conditions, especially in dry, moist, or wet rooms with normal mechanical load.

Yes, but only under consideration of the temperature range and with adequate UV protection. It should not be exposed to direct sunlight without protection.

'LBS-free' means the cable is free from paint-wetting impairment substances, making it suitable for use in painting applications or environments without affecting paint finishes.

The test voltage for this cable is 4000 V, indicating a high level of insulation safety.

Each core conductor has a size of 1.5 mm².

The cable diameter is 8.1 mm.

No, this cable is designed for fixed installations or applications with light flexing, not for continuously moving applications or those with compulsory guidance and tensile loads.

Ensure the ambient temperature is within the specified range for flexing applications (-5 to 70°C). If outside this range, the cable's flexibility will be reduced.

Verify that the tinned copper conductors are properly stripped and terminated into the connectors or terminals. Check for any corrosion or debris on the conductor ends.

Inspect the entire length of the cable for any physical damage, cuts, or abrasions to the insulation. Ensure connections are secure and not causing strain.

Confirm that UV protection measures are in place and that the ambient temperature is within the suitable range for outdoor fixed installation (-40 to 80°C).