Hansgrohe Vernis Blend Pillar Tap - Silver - 71583000

No, this is a cold-water specialist tap and is designed to only work with a cold water connection. It cannot mix hot and cold water.

It means the tap is intended solely for use with a cold water line, making it suitable for specific applications where hot water is not required or available.

The automatically limited flow rate of 5 liters per minute significantly reduces water consumption, leading to lower utility bills and a reduced environmental impact.

AirPower enriches the water with air, creating a fuller, softer stream that feels luxurious and reduces splashing, even at lower flow rates.

ComfortZone 70 refers to the height and projection of the spout, providing 70mm of clearance between the spout and the basin, offering more comfortable space for use.

Use a soft, damp cloth to wipe the surface. For tougher spots, a mild, non-abrasive household cleaner can be used. Always wipe dry afterward.

The tap is attached via a flexible connection hose with a G ⅜ thread, connecting to a standard DN15 water inlet.

Check that the main water supply is turned on. Ensure the connection hoses are not kinked or blocked. Verify that the shut-off valve is open.

The flow is intentionally limited to 5 l/min by design. If the flow seems even lower than expected, check the aerator for debris and clean it if necessary. Ensure the main water supply pressure is adequate.

Ensure the mounting hardware is tightened securely. Check the seals and gaskets for damage and replace if necessary.

Ensure the AirPower aerator is clean and functioning correctly. Debris can disrupt the air-mixing function. Gently clean the aerator.