Pearl TV Stand - Black - Pearl

The Decorotika Pearl TV Stand is designed to accommodate televisions up to 80 inches in size.

Yes, the TV stand is delivered disassembled and requires customer assembly using the provided instructions and hardware.

You will need simple household tools such as a screwdriver or a power drill. These tools are not included with the product.

It is constructed from 18mm thick, quality melamine coated manufactured wood and features first-class PVC edge banding. The materials are also TSE certified for health and safety.

The stand features three enclosed cabinets and two half-open shelves, providing ample storage for your media and other items.

Regularly wipe surfaces with a soft, slightly damp cloth. Avoid using harsh or abrasive cleaners. Wipe up spills immediately and protect surfaces from excessive heat or moisture.

Please inspect all parts upon arrival. If you find any damaged components, document them with photos and contact customer support immediately for assistance with replacements.

Thoroughly check all packaging materials, including Styrofoam and plastic bags. Sometimes smaller hardware can be tucked away. If parts are still missing, refer to the assembly guide for part numbers and contact customer support for assistance.

Ensure the TV stand is assembled on a completely level surface. Most cabinet hinges have adjustment screws that allow for minor vertical, horizontal, and depth adjustments. Consult your assembly manual for specific hinge adjustment instructions.

Double-check that all screws, bolts, and fasteners are fully tightened, but do not overtighten. Ensure the stand is placed on a flat, level floor. If your floor is uneven, use furniture leveling pads under the feet to stabilize it.

Carefully peel off stickers. If residue remains, use a soft cloth with a small amount of rubbing alcohol or a specialized sticker remover. Test on an inconspicuous area first to ensure it does not damage the finish.

Review the assembly guide carefully, paying close attention to the orientation of each part. Ensure you are using the correct screws for each step. Sometimes a piece may be upside down or backward, preventing proper fit.