Frenchic Al Fresco - Brown

It's suitable for a wide array, including furniture, woodwork, laminate, metal, uPVC, ceramic wall tiles (not in wet zones), kitchen cupboards, front doors, and interior wood or concrete floors.

No, Frenchic Al Fresco is a self-priming paint, simplifying the application process.

The paint is self-sealing and designed to be durable without a top coat for most applications. However, for very high-traffic areas or surfaces that might experience abrasion, a compatible sealant can be considered.

It is not recommended for use in very wet areas like shower enclosures or bath surrounds. It is suitable for general bathroom surfaces like tiles or cabinets where splashing is minimal.

Clean painted surfaces with a damp cloth. Avoid using harsh or abrasive cleaning agents.

A 750ml tin will cover approximately 12.5m² with a single coat. For the recommended two coats, expect coverage of around 6m².

Yes, the paint is EN71-3 certified, making it safe for use on children's toys and furniture.

Stir the paint thoroughly. If still very thick, you can add a tiny amount of water (a teaspoon per 750ml) and stir well. Ensure you are not painting in extreme temperatures.

Ensure consistent application technique and adequate coverage per coat. Apply a second coat after the first has dried thoroughly.

This can happen if the paint hasn't fully cured or if the surface wasn't properly prepared. Ensure the recommended number of coats have been applied and allow sufficient curing time. For most applications, it seals itself, but consider a compatible sealant for high-traffic areas if chalking persists.

Ensure the surface was clean, dry, and free from grease before application. For very slick surfaces, a light sanding might improve adhesion. Ensure no incompatible products were used as a primer.