Switzer Leaf Blower - 25.4Cc

The Switzer 25.4cc leaf blower typically requires a mixture of unleaded petrol and 2-stroke engine oil. Always refer to the product manual for the exact ratio, but it is commonly 50:1 (50 parts petrol to 1 part oil).

It is recommended to clean the air filter after every few uses, or more frequently if operating in dusty environments. A clogged filter can lead to poor performance and engine issues.

While it can move some wet leaves, its efficiency is reduced. For heavy, wet debris, multiple passes may be needed, or a unit with higher CFM might be more suitable.

Regular maintenance includes cleaning the air filter, checking and cleaning/replacing the spark plug, and ensuring the fuel mixture is correct. Periodic checks of fuel lines and the overall condition of the unit are also advised.

As a petrol-powered unit, it produces noise typical of such engines. Hearing protection is recommended during operation.

Please refer to the product manual or contact the retailer for specific warranty information, as it can vary.

Check if the fuel tank is filled with the correct fuel-oil mixture. Ensure the spark plug is clean and properly connected. Verify the choke is in the correct starting position. Check that the primer bulb (if equipped) is functioning.

Clean or replace the air filter. Ensure the fuel-oil mixture is fresh and correctly proportioned. Check for any blockages in the fuel line or nozzle. Inspect the spark plug.

Inspect the blower tube and intake for any obstructions. Clean the air filter, as a clogged filter significantly reduces airflow. Ensure the engine is running at full throttle.

Ensure all screws and bolts are tightened. Check the fan or impeller for damage or debris buildup. Make sure the handle and straps are securely attached.