Yard Force Robotic Lawnmower - MB400

The boundary wire defines the mowing area. Lay the wire around the perimeter of your lawn, securing it with pegs. Make sure to avoid obstacles and create a clear path for the mower.

The mower automatically returns to the charging station when the battery is low. For optimal performance, ensure the battery is fully charged before each mowing session.

Turn off the mower and use a brush or damp cloth to clean the cutting blades and the underside of the mower. Do not use water directly on the electronic components.

The Yard Force MB400 comes with a 2-year warranty.

The mower performs best on relatively even surfaces. Avoid using it on excessively sloped or bumpy lawns.

The cutting height can be adjusted using the controls on the mower. Refer to the user manual for specific instructions.

The mower is equipped with sensors that detect obstacles. It will reverse or change direction to avoid them.

Check the power switch and ensure the battery is charged. Verify that the boundary wire is correctly installed and connected.

Check the boundary wire for any breaks or disconnections. Make sure the mowing area is within the specified 400m² limit.

Check the cutting blades for sharpness and replace if necessary. Adjust the cutting height as needed.

Ensure the mower is within Bluetooth range and that there are no obstructions interfering with the signal. Restart the mower and the app if necessary.