Petrol Inverter Generator - Loncin

The generator typically uses SAE 10W-30 or SAE 10W-40 engine oil. Always refer to the owner's manual for the specific type and capacity.

Run time varies with load. With its 4.2-litre tank and the eco throttle, it can run for approximately 6-8 hours at a 25% load, and less at higher loads.

This generator is designed for portable, individual appliance use or small loads. Connecting it directly to a home's electrical panel typically requires a transfer switch and professional installation to prevent back-feeding and ensure safety.

Warranty information can vary by region and retailer. Please consult your purchase documentation or the manufacturer's official website for the most accurate warranty details.

While reliable, generators are best used for intermittent periods, especially under heavy load. Allow for cool-down periods as recommended in the user manual for longevity.

Use the dedicated 12V DC output terminals. Connect the positive (+) and negative (-) terminals of your battery to the corresponding outputs on the generator using appropriate charging cables. Ensure the engine is running.

Check fuel level, ensure fuel valve is open, check oil level, ensure the choke is in the correct position for starting, and verify the engine switch is on.

Ensure the engine is running, check that the AC output circuit breaker has not tripped, and verify that the load connected does not exceed the generator's rated capacity.

Check the AC output circuit breaker. If tripped, reset it. If it trips again immediately, there may be a short circuit in the connected appliance or the generator itself. Reduce the load.

Ensure air vents are not blocked and that the generator is not overloaded. Allow the unit to cool down before restarting.

Ensure the generator is on a flat, level surface. Check that all mounting bolts are secure. Avoid overloading.