Cuprinol UV Guard Decking Oil - Natural - 2.5L

A 2.5L can typically covers up to 20 square meters depending on the wood's condition and application method.

The drying time is typically between 2 to 6 hours, dependent on the weather conditions and the nature of the surface.

Yes, it is suitable for softwood decking. It is recommended to check the wood's suitability for outdoor use before application.

Sanding is recommended for very weathered decking or previously coated surfaces, but a thorough cleaning is always essential.

It is recommended to apply two coats for optimal protection and colour restoration. Allow the first coat to penetrate the wood before applying the second.

Store the oil in a cool, dry place away from extreme temperatures and direct sunlight.

Yes, the Cuprinol UV Guard Decking Oil is water-based.

Clean the tools with water immediately after use.

Ensure the surface is properly prepared by cleaning and sanding if necessary. The wood may also be too sealed; in this case, consider a different product.

Apply the oil evenly, following the grain of the wood. Avoid applying too much oil at once to prevent puddling. Apply a second coat if needed.

Ensure you have the correct colour and that the wood is clean. The final colour can also depend on the wood type. Apply a second coat to deepen the colour.