Smartseal - Premium Sealer Stripper - 5L

It is effective at removing solvent and non-solvent acrylic sealers. It is not suitable for removing impregnating sealers.

Yes, the product is suitable for both internal and external use.

It can be used on concrete, natural stone, imprinted concrete, flagstone, and similar surfaces.

No, it is a ready-to-use formula and does not require mixing.

Refer to the product's specific instructions for the recommended dwell time, but it is typically around 15-30 minutes.

After the sealer has been lifted, rinse the surface thoroughly with clean water, potentially using a pressure washer on a low setting.

Ensure the product was applied generously and allowed adequate dwell time. Agitating with a stiff brush can help. A second application may be necessary for stubborn or multiple layers of sealer.

Ensure the stripper was applied liberally and allowed to dwell for the recommended time. Reapply if necessary, and try agitating with a stiff brush during the dwell time. Check if the sealer is an impregnating type, as this product is not designed for them.

Thoroughly rinse the surface again with plenty of clean water. Ensure all stripper residue has been washed away. A second rinse may be necessary.

Apply a thicker, more generous coat. The product needs sufficient contact time and saturation to break down the sealer.