Smartseal Premium Graffiti Remover - 100ml Sample

Yes, Smartseal Premium Graffiti Remover is suitable for both internal and external use. However, ensure good ventilation when using indoors due to its solvent-based nature.

No, the product is ready to apply straight from the container and should not be diluted.

It can be safely used on most external surfaces including concrete, masonry, metal, glass, plastic, brickwork, and stone.

Apply a generous coat and leave until the stripper has penetrated the surface, typically 10-20 minutes, before wiping and rinsing.

While it removes many types of paints, varnishes, and lacquers, it's always recommended to test on a small, inconspicuous area first to ensure compatibility with the specific surface and any existing coatings.

Wear appropriate personal protective equipment, including gloves, eye protection, and a mask if ventilation is poor. Work in a well-ventilated area.

Multiple applications will likely be required for old, baked-on, or multiple layers of graffiti. Allow sufficient penetration time for each application.

Apply a second or subsequent coats, allowing adequate penetration time for each. Ensure the product is applied generously and evenly.

Immediately rinse the area thoroughly with cold water. Remove the product from the test area and discontinue use on this surface. Test on a more inconspicuous spot first.

Ensure a strong stream of cold water is used for rinsing. If residue remains, a gentle scrub with a brush while rinsing may help.

Ensure the area is well-ventilated. Wear a suitable respirator mask if working in an enclosed space.