Resistant to water, alcohol, white spirit and similar solvents. Very hard wearing. Touch dry in 20...Resistant to water, alcohol, white spirit and similar solvents. Very hard wearing. Touch dry in 20 minutes and re-coatable in 2 hours. Features: Water based & quick drying Satin finish Colours available in 2.5 litre Satin only Specifications: Dimensions: H:156.0 x W:156.0 x D:156.0 cm Colour: Brown Guarantee:Na Material: Liquid Model Number: AFDO2500. Non-toxic, quick drying, low odour, completely clear and non-yellowing. Resistant to water, spirits and similar liquids. Very hard wearing. Touch dry in 20 minutes and re-coatable in 2 hours.Generally, has very little effect on the colour of the timber it is applied to. Rustins Quick Dry Coloured Floor Varnish. Colour: Dark Oak. Size: 2.5 Litre.
Rustins Quick Dry Coloured Floor Varnish Medium Oak 2.5 Litre - TeakFree delivery in 1–3 days£48.50Visit shop →
Rustins Quick Dry Coloured Floor Varnish Light Oak 2.5L - Aflo2500 - Clear SatinFree delivery in 1–3 days£48.50Visit shop →
Product Information
Full details
This guide is for anyone looking to protect and enhance wooden floors with Rustins Floor Varnish in Dark Oak. It offers a hard-wearing, quick-drying, and low-odour finish, resistant to common household liquids. However, it's only available in a satin finish for this specific Dark Oak variant. This product is ideal for those seeking a durable and aesthetically pleasing floor finish.
All features
Colour
Brown
Model Part Number
AFDO2500
Brand
Rustins
Extended Product Information
FAQs
How long does it take for the varnish to dry?
It is touch dry in approximately 20 minutes and re-coatable in 2 hours.
Can I use this varnish on furniture?
While primarily designed for floors, it can be used on other wooden surfaces. Test on a small, inconspicuous area first.
How many coats of varnish should I apply?
Two or more coats are generally recommended for optimal protection and durability.
What should I do if the varnish spills?
Wipe up spills immediately with a clean cloth. For dried spills, use a suitable solvent, following safety guidelines.
Can I apply this varnish over existing varnish?
It's best to remove the existing varnish by sanding before applying a new coat. Ensure the surface is clean and smooth.
What is the coverage of the 2.5-litre tin?
Coverage will depend on the surface and application method. Refer to the product label for specific details.
Troubleshooting
Varnish is not drying properly.
Ensure adequate ventilation and a suitable temperature. Make sure the applied coat is not too thick. Check the product's expiration date.
Varnish is showing brush marks.
Use a high-quality brush and apply thin, even coats. Lightly sand between coats to remove imperfections.
The finish is not as durable as expected.
Ensure that the surface was properly prepared before application. Apply additional coats of varnish for increased durability.
Pros and Cons
Pros
Quick drying time allows for faster project completion.
Water-based formula offers low odor, improving user comfort.
Durable finish provides long-lasting protection for wooden floors.
Resistant to common household spills, like water and alcohol.
Enhances the natural wood grain with a satin finish.
Cons
Only available in a satin finish for this Dark Oak variant.
Requires proper surface preparation for optimal results.
Multiple coats may be necessary to achieve desired durability.
Color may vary slightly depending on the timber it is applied to.
Setup, Compatibility & Care
Preparation: Ensure the floor is clean, dry, and free from any old varnish or wax. Sand the surface lightly to create a key for the varnish to adhere to.
Application: Stir the varnish thoroughly before use. Apply a thin, even coat using a brush or applicator. Avoid applying too much varnish at once to prevent runs or drips.
Recoating: Allow the first coat to dry for approximately 2 hours before applying the second coat.
Compatibility: This varnish is compatible with most types of wooden flooring.
Care: Clean the floor regularly with a damp cloth and mild detergent. Avoid using harsh chemicals or abrasive cleaners that could damage the finish.