A classic maritime design, the Brass oval bulkhead is a traditional die-cast brass bulkhead light ...A classic maritime design, the Brass oval bulkhead is a traditional die-cast brass bulkhead light with frosted prismatic glass diffusers from Davey''s original collection. Made here in the UK using the centuries old technique of sandcasting, the light is suitable for bathroom and exterior use thanks to its IP54 rating. The front guard of the light is secured by four wing nuts, and the back has a glanded surface cable entry. Available in three sizes with either polished or weathered brass fittings.
The Davey Lighting Oval Bulkhead in Weathered Brass is designed for those seeking durable, classic maritime lighting for both interior and exterior applications, including bathrooms. Its key benefit lies in its robust construction and traditional aesthetic, offering a timeless look. A potential consideration is its specific weathered brass finish, which may require periodic maintenance to maintain its appearance.
All features
Colour
Brown
Model Part Number
DP7034/BR/WE
Brand
Davey Lighting
Extended Product Information
FAQs
Is this light suitable for outdoor use?
Yes, the Davey Lighting Oval Bulkhead has an IP54 rating, making it suitable for exterior use and protection against dust and water splashes.
What type of bulb does this fitting take?
The fitting requires a standard screw-in bulb. Please refer to the product label for the maximum wattage recommendation.
How do I clean the weathered brass finish?
Use a soft, damp cloth for regular cleaning. For restoration or to maintain a specific look, use a brass cleaner specifically designed for weathered finishes. You can also allow it to develop a natural patina.
Can I use this light in a bathroom?
Yes, its IP54 rating makes it safe for use in bathroom zones where splashing may occur.
How is the light secured to the wall?
The light features a glanded surface cable entry and is mounted to the wall using appropriate fixings (not supplied) which screw into the backplate.
What are the dimensions of this bulkhead?
This guide refers to the Davey Lighting Oval Bulkhead. Please refer to the product's specific technical drawing or specifications for exact dimensions.
Is this product made in the UK?
Yes, Davey Lighting products, including this bulkhead, are made in the UK using traditional sandcasting techniques.
Troubleshooting
Light does not turn on
Ensure the power is switched on at the mains. Check that the bulb is correctly installed and not burnt out. Verify all wiring connections are secure and compliant with electrical codes.
Flickering light
This could indicate a loose bulb or a faulty bulb. Try tightening the bulb or replacing it. If using a dimmable bulb, ensure it is compatible with the dimmer switch.
Condensation inside the glass
Minor condensation can occur in fluctuating temperatures. Ensure the wing nuts are securely fastened to maintain the seal. If persistent, check the seal around the glass for damage.
Pros and Cons
Pros
Offers a classic, timeless aesthetic suitable for historic or traditional properties.
Built with durable materials and traditional sandcasting techniques for longevity.
IP54 rating makes it suitable for damp and outdoor environments.
The weathered brass finish provides a unique, characterful look.
Easy to install and maintain with accessible fastenings.
Cons
Weathered brass finish may require occasional polishing to maintain its intended look.
Only available in one specific size in this configuration.
Requires manual bulb replacement, unlike some modern LED integrated fixtures.
Setup, Compatibility & Care
Setup:
Ensure power is switched off at the mains before installation.
The bulkhead has a glanded surface cable entry; run your electrical cable through the gland.
Mount the backplate securely to the wall using appropriate fixings (not included).
Install a suitable bulb (check maximum wattage on the fixture).
Replace the glass diffuser and secure it with the four wing nuts.
Connect wiring as per local electrical regulations.
Restore power at the mains.
Compatibility:
Requires a standard screw-in bulb (type and maximum wattage to be confirmed on the product label).
Compatible with dimmable bulbs if connected to a compatible dimmer switch.
Care:
For cleaning, use a soft, damp cloth. Avoid abrasive cleaners.
The weathered brass finish can be maintained with a specific brass cleaner if desired, or left to develop a natural patina.
Periodically check the glass seal and wing nuts for tightness.