Dare 2b Waterproof Switch Out III Jacket - L

The jacket offers excellent windproof and waterproof protection but limited insulation. For very cold conditions, it is designed to be layered over warmer mid-layers like fleece or down jackets.

Refer to the brand's sizing chart for accurate measurements. The jacket is designed with stretch panels for a comfortable fit during activity, so consider your typical layering needs when selecting a size.

Yes, while optimized for hiking with its fabric and stretch panels, it is suitable for any outdoor activity where protection from rain and wind is needed, such as trekking, camping, or even casual wear on wet days.

ARED 20/30 is Dare 2b's high-performance fabric technology that provides excellent waterproof, breathable, and windproof protection, rated to 20,000mm waterproof and 30,000g/m²/24h breathability.

Re-proofing is recommended when you notice water no longer beads on the surface and begins to soak into the fabric. This typically occurs after significant wear or numerous washes.

Yes, you can machine wash the jacket at 30°C (85°F) on a gentle cycle with a mild detergent specifically designed for outdoor gear. Avoid fabric softener and bleach.

The Durable Water Repellent (DWR) finish may have worn off. Wash the jacket using a technical cleaner and then tumble dry on low heat to reactivate the DWR. If performance is still poor, apply a new DWR treatment according to product instructions.

Gently clean the zipper teeth with a soft brush and water. Apply a silicone-based lubricant or wax (like beeswax) to the zipper teeth for smoother operation.

Ensure the jacket is clean and free from dirt and oils, which can block pores. Wash with a technical cleaner and rinse thoroughly. Check that vents (if any) are open and not obstructed.

Inspect the taped seams for any damage. Minor issues might be temporarily addressed with seam sealer, but significant damage may require professional repair or replacement.