MAP TKS G20 14.5m Pole - Map - X2T9D

Graphene resin provides exceptional strength and durability while allowing the pole to remain incredibly well-balanced and lightweight, without the added weight typically associated with extra carbon layers.

Yes, the TKS G20 is manufactured off the same mandrel as the TKS 301, meaning there is full section interchangeability between these two models.

The depth markers are printed directly onto the top kits, allowing you to quickly and accurately set or recall the exact depth you need for fishing.

Each top kit is supplied with an extra-long pure PTFE bush fitted as standard, ensuring smooth performance and durability.

Yes, the pole comes with a dedicated pole holdall for protection and transport.

The pole weighs approximately 1400g at its full 14.5m length.

Yes, the TKS G20 features fitted side roller pullers on all supplied kits for enhanced angler control.

Ensure all sections are clean and dry. Check for any debris trapped in the joints. A light application of pole lubricant or pole silk to the male ferrules can improve smoothness. Avoid forcing sections.

Inspect the roller for any dirt or fishing line that may be obstructing its movement. Clean carefully with a soft brush or cloth. If damaged, the roller may need replacement.

The markers are printed onto the carbon. Ensure the section is clean and that you are viewing it under good light. The accuracy depends on consistent rigging and measuring; ensure your elastic and rig setup is consistent.

While designed for balance, personal perception can vary. Ensure you are using the pole at a comfortable length. Check that no excess water or mud has accumulated on the sections. For very long sessions, consider using a pole support.