Dulux Trade Diamond Glaze Varnish - Clear Satin

Coverage is approximately 12-25 m² per litre, depending on the surface and the number of coats applied.

Allow at least 2 hours between coats.

No, this varnish is specifically designed for interior use only.

Clean brushes and rollers with water immediately after use.

Avoid heavy wear and do not replace carpet or rugs or move furniture for at least 7 days after application.

No, the product should only be applied with a brush or a short pile mohair roller.

The VOC content is 129 g/l, which is categorized as Medium (8 - 24.99%).

Contact the AkzoNobel Technical Advice Centre on 0333 222 70 70 or visit duluxtrade.co.uk.

Ensure the room temperature and humidity levels are within the recommended range. Check for proper ventilation. The drying time may be significantly longer in cold or damp conditions.

Apply the varnish evenly and consistently, maintaining a wet edge. Use a high-quality brush or roller designed for varnish application. Lightly sand between coats.

Ensure proper surface preparation. The surface must be clean and free of previous coatings that may affect adhesion. Sand lightly before application and between coats to promote adhesion.

The product is designed to be non-yellowing. Ensure the varnish has been stored correctly, away from extreme temperatures and direct sunlight. Check that you are using the correct product for your needs.