Dulux Trade Diamond Glaze Varnish - Clear Gloss

The varnish covers between 12-25 m² per litre, depending on the surface and application method.

It typically dries in 1-2 hours, but this can vary depending on environmental conditions.

No, this varnish is designed for interior use only.

Apply a minimum of two coats, but three coats may be necessary for high-wear areas.

Clean brushes and rollers with water immediately after use.

Yes, lightly sand between coats with fine-grade sandpaper to ensure a smooth finish.

Yes, as long as the existing varnish is in good condition and the surface is properly prepared.

Ensure adequate ventilation and check the room temperature and humidity levels. Allow more drying time between coats.

Ensure the surface was properly prepared (sanded and cleaned) before application. Lightly sand the area and reapply the varnish.

Avoid over-brushing or rolling. Apply thin, even coats and allow the varnish to level itself.