Bond It Patination Oil - 500ml - White

Clean and dry the lead surface. Apply the oil evenly using a brush or cloth, ensuring full coverage.

Drying time varies depending on environmental conditions; typically a few hours. Check the product label for specific drying times.

No, it is specifically designed for use on lead. Not recommended for other metals.

Reapplication depends on environmental conditions. It is typically every few years.

Clean the lead surface thoroughly before applying the oil to remove existing stains.

Use in a well-ventilated area and follow the safety instructions on the product label.

Store in a cool, dry place away from direct sunlight and keep the container tightly sealed when not in use.

Coverage depends on the lead surface and application method. A 500ml can provides ample coverage for a typical project.

Ensure the lead surface was properly cleaned before application. Reapply the oil, making sure to cover all areas evenly.

Ensure the application area is well-ventilated. Apply the oil in thin, even coats.

Apply the oil more evenly, working in the direction of the lead grain. You may need to apply another coat.