Bosch SDS Plus Hammer Masonry Drill Bit - 6 x 210mm

The Bosch SDS Plus drill bit is designed primarily for use in concrete, brick, and masonry.

Select the drill bit size based on the diameter of the anchor or fastener you plan to use.

Keep the drill bit clean and store it in a dry place. Inspect it regularly for wear and tear, and replace it when necessary.

Effective dust removal prevents clogging and overheating, which can reduce the drill bit's lifespan and drilling efficiency.

PGM approval guarantees precise diameter accuracy, ensuring that the holes drilled will be the correct size.

No, this drill bit is designed for SDS Plus rotary hammer drills only.

Apply steady and consistent pressure, allowing the drill bit to do the work. Avoid forcing the bit.

Reduce the drilling speed, apply less pressure, and allow the bit to cool down periodically. Ensure the flutes are clearing the dust effectively.

Check the drill bit for wear and tear. Ensure you are using the correct speed and pressure. Check that the bit is properly inserted into the chuck. Make sure you are using the correct drill bit for the material you are drilling into.

Reduce the drilling speed and apply less pressure. Allow the bit to cool down periodically. Ensure that the flutes are clearing the dust effectively.

Check the drill bit for wear and tear. Make sure you are using the correct size drill bit for the application. Ensure that you are using the correct drilling technique.

Reduce the drilling speed and apply less pressure. Remove the bit and clear the hole of debris. Ensure that the bit is straight and not bent.